Hasselblad H3D 31MPix - Browse Filter Options

1
2 3

There is also a one-button short-
cut for changing the browse
lter.
To use it, press and hold (do not
click!) the Instant Approval but-
ton until the approval status
colour appears. Browsing will
then only display the images
with that classication.
 Browse shortcut !
57
Browse
e browse lter complements the instant-approval system by
enabling you to browse through images according to their approval
status. You have the following choices:
All: browses all of the images in the current batch, regardless
of their approval status. is is the default.
Red: browses only red-status images from the current batch.
ese are images that you have marked for likely deletion.
You might browse these images to make sure you have not
eliminated any usable images and/or to nd images that you
can delete to make room for new shots.
Green: browses only green-status images from the current
batch. ese are either new shots that did not trigger an ex-
posure warning or shots that you manually assigned to green
aer overriding an exposure warning.
Green & Yellow: browses green and yellow-status images, but
does not show red-status images. ese are probably images
that you have either decided to keep or not yet checked for
approval status.
For more information about using the instant-approval system,
please see Using Instant Approval Architecture.
To set the browse lter using the menus:
1. Choose
MAIN MENU > Browse. The current setting is dis-
played here.
2. Use the
or button to step through the lter options
(described above) until you have selected the lter you wish
to use.
3. Either move on to another setting by using the navigator but
-
ton or press the menu button to exit the menu system and
keep your setting.
e appearance of the ‘Empty Browse Filter’ message signies that
there are no images with that particular approval status.
•
•
•
•
•