Hasselblad H3D 31MPix - Image Deletion and Transfer to Computer

There is also a one-button short-
cut for deleting single images.
To use it, select a target image
and then press and hold the 
until the conrm-delete dialog
opens.
 Delete shortcut !
Deleting images − general
e H3D enables you to delete images using any of the following techniques:
• Delete the currently selected image only.
• Delete all images from the current batch
• Delete all images from the current medium
• Delete all red-status images from the current batch
• Delete all red-status images from the current medium
• Delete all red- or yellow-status images from the current batch
• Delete all red- or yellow-status images from the current medium
Another way of working is to simply assign unwanted images as Red. In this way, you
retain the option (for a while) of changing your mind later while allowing the system
to automatically delete the unwanted images as the storage medium lls up.
You will always be asked to conrm each delete operation.
For complete details about how to use the menu system to delete single or multiple im-
ages, please see MAIN MENU > STORAGE > Delete.
Transferring images
Transferring to a computer
To transfer images stored on the compact-ash card to your computer, simply connect
the digital back to a computer using a FireWire cable and then run FlexColor, which will
automate the process. See your FlexColor manual for details.
See also Connecting to the Computer for details about how to connect to a computer.
50