Hasselblad H3D 31MPix - Page 122

The HM 16-32 Film Magazine is an optional accessory.
122
6
7
Film wind on and o 6, 7
Wind on: See ‘Film wind-on’ under Custom Options for a set-
ting choice.
Wind o: When the last frame has been exposed, the lm will
automatically be wound o. However, to wind o a lm sooner,
press the lm wind o button (g. 6). Use a ballpoint pen or similar
to activate it. You must also conrm the message on the grip LCD
(g. 7) before the lm winds o.
Unloading a lm
To remove a lm, remove the lm holder in the same manner
as when loading a lm. Grip the exposed roll of lm rmly and
remove. Ensure the paper backing is wound tightly and that it is
sealed with the band properly (the band may need to be mois-
tened to activate the adhesive depending on type). Store exposed
lms away from strong light sources and contact with sharp
objects. Move the remaining empty spool to the take-up spool
compartment.