11. Press either the or button to make an INITIAL DELAY
setting.
This setting controls the amount of time that elapses
before the rst exposure in the sequence.
12. Press
to select DELAY.
13. Press either
or to make a DELAY setting.
This setting controls the amount of time between each
exposure in the sequence.
14. Press
to select COUNT.
15. Press either
or to make a COUNT setting.
This setting controls the number of exposures in the
sequence.
16. Press
OK to conrm all the settings.
17. The CFH is now ready for sequence start. Note that the
MENU/
EXIT button now diplays START instead:
18. Press
START to set the sequence running.
19. Note that the
EXIT button now displays STOP. The sequence
can be stopped at any time by pressing this button and the
standard menu display returns.
11 12
13 14
15 16
17 18
19
72
To Next Page
Loading...
