Hasselblad H3D 31MPix - Page 91

1 2
3
4
5
6
7
8
9
10
11
12
-%.5
&
$2)6%
%NTER
&
2
2
&
$2)6%
3AVE
$2)6%
%NTER
$2)6%
%NTER
AF
On
$2)6%
%NTER
AF
On
Self timer setting
The Self timer function is set in the following manner:
1) Press the MENU button on the grip.
2) Turn the front control wheel until
Self Timer appears.
3) Press
ENTER (DRIVE button) on the grip.
4) Turn the front control wheel to access the options, that are:
Delay
Mirror sequence
Mirror Up / Mirror Goes Down
(A drop shadow will be displayed beneath the selected symbol,
for example
)
5) When
Delay is highlighted - - turn the rear control wheel
to choose a delay range from 2 - 60s in 1s intervals.
6) Turn the front control wheel again to choose
Delay / Mirror
Up, Mirror Up/ Delay sequence - . When highlighted
turn the rear control wheel to choose.
Delay / Mirror Up sequence =
Delay for set amount of time — mirror raised — exposure
made.
Mirror Up/ Delay sequence =
Mirror raised — delay for set amount of time — exposure
made.
7) Turn the front control wheel again for
Mirror goes down
/ Mirror remains up - .- choice.
Turn the rear control wheel to choose.
Mirror goes down =
Mirror returns to its normal position and the camera is made
ready for the next exposure.
Mirror raised =
Mirror remains in raised position. No image is visible in the
viewnder until M UP button pressed.
8) Press
On (AF button). Note that this now reads O and the
line of text at the bottom of the screen reads ‘Self timer on’.
9) Press
SAVE (DRIVE button) to save the setting.
10) Press
ENTER (DRIVE button) again from the Self Timer
screen to activate the function.
11) Click
On (AF button).
12) Half-press the shutter release button to standby mode for this
function (press the shutter release button again (full press)
for activation) or full-press the shutter release for immediate
activation.
Check the lower text-row on the screen for ON or OFF status.
You can halt the sequence by clicking the ON / OFF ( ESC )
button.
‘Delay’ highlighted with drop
shadow. 10 seconds chosen.
Mirror sequence highlighted.
‘Delay rst, then mirror raised’
chosen as option.
Mirror down /up highlighted.
‘Mirror down after exposure’
chosen as option.
91