INFRARED FOCUS SETTING
As infrared rays form an image at a plane different to
that formed by visible light, the normal focus settings
do not apply. Proceed as follows in manual focus
mode:
1 Focus the lens.
2 Note the distance setting at the central lens
index.
3 Realign this distance setting against the infrared
mark (coloured red) instead of to the central lens
index.
If the distance is calculated, a manual distance
setting with use of the distance scales together with
the infrared mark is made.
Note!
Please contact your Hasselblad dealer for
information about sensor units adapted solely for
"near infrared" Photography.
H6D www.hasselblad.com
USER GUIDE
To Use
101
A
To Next Page
Loading...
