TO REMOVE A MEMORY CARD
Remove CFast card
1 Open the memory card slot cover on the sensor unit (A).
2 Press the CFast card (B) a little way in and then release it.
3 The card is then pushed out a few millimeters.
4 Grab the card and pull it away from the sensor unit.
5 Close the slot cover door.
Remove SD card
1 Open the memory card slot cover on the sensor unit (A).
2 Press the SD card a little way in and then release it. The SD
card will then move out from the SD card slot (C).
3 Grab the card and pull it away from the sensor unit.
4 Close the slot cover door.
Note!
Do not remove a CFast or SD card from the Sensor Unit if the
ready-light (D) is blinking! The ready-light (D) is displayed in the
lower right corner on the Sensor Unit display.
All les on the card may become corrupted (and consequently
lost) if you do so and new formatting may also be necessary.
MAIN MENU
Exposure
Wi-Fi Display
Focus
Live View
LV
Storage
A
B C
D
H6D www.hasselblad.com
USER GUIDE
Overview
47
To Next Page
Loading...
