Hasselblad H6D-50C - Error Messages

H6D www.hasselblad.com
USER GUIDE
Troubleshooting
177
7.1 ERROR MESSAGES
If any error message is displayed on the Sensor Unit
Display or on the Camera Grip Display, follow these
instructions.
Caution!
Be careful when you attach and remove the
components to, and from, the camera. This will help
prevent damage to the data-bus connections.
1 Remove the components from the camera.
2 Attach the components to the camera again.
If the error message is still displayed, do as follows:
1 Remove the battery grip.
2 Wait 10 seconds.
3 Attach the battery grip again.
The camera’s processor has now been reset.
If the error message is still displayed, do as follows:
1 Write down the error message.
2 Contact your local Hasselblad dealer.
Battery reset
Error message 121:1.
Remove battery and
reinsert it.
Card Error
CFast and SD card error
message.
Battery Error
Incompatible error
message.
Error message
Error message 10000:1.