H6D www.hasselblad.com
USER GUIDE
To Use
136
5.25 GENERAL SETTINGS CHECK FOR UPDATE
MAIN MENU > GENERAL SETTINGS >
CHECK FOR UPDATE
1 Press the General Settings icon on the
Sensor Unit display.
2 The General Settings Menu appears.
3 Press the General Settings Check for
Update button.
4 The camera will now check the inserted
card or cards for update les.
Swipe right or press Menu / EXIT button to
get back to Main Menu.
Note!
The battery needs to be charged over
50%, to enable the Camera to perform a
complete Firmware Update.
UPDATE H6D FIRMWARE PROCEDURE
1 Download the latest H6D Firmware
from www.hasselblad.com.
2 Save the Firmware le to the root on
a CFast or SD Card. Do not save the
Firmware le in a folder (or subfolder).
3 Insert the CFast or SD Card in the H6D
Camera.
4 Select General Settings from the Main
Menu.
5 Select Service.
6 Select Firmware Update.
7 Select Check for Update.
8 Make sure the Firmware File Name
and Number corresponds to the latest
Firmware File you have downloaded.
9 Select Update.
10 During the update the text "Update
in progress" and "Do not turn off!" is
displayed on the H6D Camera Display.
11 Do not turn off the H6D Camera during
the Update Progress.
12 The Update will take several minutes.
13 When the Update is nished this text
will be displayed: "Update Finished.
Please remove and reinsert battery!".
14 Remove and reinsert the battery.
15 Start the H6D Camera.
16 The new Firmware will now be installed!
General Settings Menu
Wi-Fi
Display
Storage
Date & Time
GENERAL SETTINGS
Power & Timeouts
Language
Spirit Level
Service
About
MARCH
8
FIRMWARE UPDATE
No Updates available
Exit
GENERAL SETTINGS: SERVICE
FIRMWARE UPDATE
H6D_v1_12_0.cim
Cancel
Check for Update
Firmware Update dialogue when no
Firmware Updates are available.
Firmware Update dialogue when
two Firmware Updates are
available.
Firmware Update
H6D_v1_12_1.cim
Update
Deactivate Storage:
GENERAL SETTINGS: SERVICE
Firmware Update
Log Data
Demo Mode
Check for Update
Save
Service Menu
To Next Page
Loading...
