Hasselblad H6D-50C - Exposure Lock

H6D www.hasselblad.com
USER GUIDE
To Use
95
EXPOSURE LOCK
MAIN MENU > CAMERA SETTINGS > EXPOSURE > EXPOSURE
LOCK
1 Press the Camera icon on the Sensor Unit display.
2 The Camera Settings Menu appears.
3 Press the Exposure Settings Menu.
4 Scroll down to Exposure Lock.
Swipe right or press Menu / EXIT button to get back to Main
Menu.
Exposure Lock
Flash Ready Exposure Lock
Select On or Off.
On blocks the shutter until ash is ready.
Off allows shutter release before ash is ready.
Allows you to make a capture be fore the ash is fully charged.
For use with integral ash unit or other TTL compatible ash
units con nected to the hot shoe. Not valid for ash units
connected by the PC connector.
Lens Exposure Lock
Select On or Off.
On blocks the release of auxiliary shutter in camera body if
there is no lens attached. Generates message on grip display if
attempted.
Off allows a release of auxiliary shutter in camera body without
a lens attached.
If Lens is selected, it is not possible to expose without the Lens
mounted. Allows you to release the auxiliary shutter in camera
body without a lens attached.
Out of Range Exposure Lock
Select On or Off.
On blocks the shutter if beyond the working range.
Off allows the shutter to be released (1/2000s or 1h08m) if
beyond the working range.
Allows you to release the camera when either the aperture or
shutter speed setting is beyond the work ing range (indicated on
the displays by “–”).
Exposure Settings Menu
Increment Step Size
Mirror
Image Orientation
Exposure Mode
Exposure Lock
Flash
CAMERA SETTINGS: EXPOSURE
Exposure:
Exposure Adjust:
Sync:
Spot Mode:
Orientation:
Extra Mirror Delay:
True Exposure:
Low Flash Warning:
Flash Ready:
Always Return Mirror:
Lens:
Out of Range:
1/2 step
1/3 step
Normal
Normal
Auto
None