H6D www.hasselblad.com
USER GUIDE
Troubleshooting
179
7.3 CLEAN THE LENS GLASS
REMOVE DUST
Caution!
Do not touch the glass surface with your ngers.
This can cause damage to the equipment.
If there is dust on the lens glass, do as follows:
1 Remove the dust with a blower brush or very
soft lens brush.
REMOVE SMEAR
Caution!
Do not touch the glass surface with your ngers.
This can cause damage to the equipment.
If there is smear on the lens glass, do as follows:
1 If you are not sure how to remove the smear,
contact your local Hasselblad Authorized
Service Centre.
2 Clean the lens glass with a high quality lens
cleaning solution on a tissue.
To Next Page
Loading...
