Need help?Do you have a question about the haTmed Q50B and is the answer not in the manual?
General| Brand | haTmed |
|---|---|
| Model | Q50B |
| Category | Laboratory Equipment |
| Language | English |
Identifies symbols used on the sterilizer for user guidance.
Warning against sterilizing liquids to prevent product damage.
Operator must be trained professional for using sterilizers.
Guidelines for safe use and maintenance of the power cord and plug.
Specifies professional installation and setup by authorized personnel.
Lists all standard accessories included with the sterilizer.
Provides visual details of the sterilizer's components.
Details the specifications and technical data of the sterilizer models.
Instructions on how to properly load items into the sterilizer for effective sterilization.
Overview of the control panel, buttons, and intelligent controller functions.
Explains the function of each button on the control panel and status indicators.
Procedure for manually opening the door in emergency situations.
Details the stages of a sterilization cycle: pre-vacuum, heating, holding, drying.
Instructions for performing a vacuum test to check for system leaks.
Important steps and warnings to follow when unpacking the sterilizer.
Specifies environmental and location requirements for safe installation.
How to adjust the sterilizer's height for optimal drying and water saving.
Details electrical and water connection specifications and precautions.
Guidelines for safe electrical connections, including voltage and circuit requirements.
Instructions for filling the distilled water tank and water quality standards.
How to connect the wastewater drain pipe.
Information regarding the installation service form for maintenance.
Guidelines for safely handling and transporting the sterilizer.
Steps to take when powering on the sterilizer for the first time.
Actions to perform after initial power-on, including pressure test.
How to properly open and close the sterilizer door.
Instructions for filling the distilled water tank and checking water level.
How to drain the waste water tank.
Methods for verifying sterilization effectiveness, including B&D test.
Guidelines for proper loading of items to ensure effective sterilization.
How to choose the appropriate sterilization program based on load type.
Settings and options available to customize sterilization cycles.
Enables automatic preheating to reduce cycle time.
Configuration for automatic printing of sterilization records.
Adjusting drying time for better results, especially with cotton fabrics.
Steps to start and monitor a sterilization cycle.
Procedure to initiate the selected sterilization program.
Monitoring the progress of the sterilization cycle stages.
How to safely stop a running sterilization program.
What happens when a cycle finishes normally, and how to safely open the door.
Guidelines for storing sterilized items to maintain sterility.
Procedure to test for leaks and ensure system integrity.
Used to check steam penetration for porous loads.
Verifies steam penetration for hollow instruments.
Procedure to drain water from the sterilizer.
How to set the current date and time on the sterilizer.
How to set the date on the sterilizer.
How to change the display language of the sterilizer.
Configuration for automatic preheating to reduce cycle time.
Configure automatic printing of sterilization records.
Adjusts drying time for improved results.
How to test the quality of the distilled water used.
Procedure to reset the sterilizer to factory settings.
Displays model, version, and serial number information.
How to export sterilization records via USB for long-term storage.
Details automatic printing of sterilization records.
Explains the format and content of sterilization records.
Importance of cleaning items before sterilization to prevent device issues.
General information on maintaining the sterilizer for longevity.
Details regular cleaning and maintenance tasks for the sterilizer.
Annual maintenance requirements and professional service advice.
Troubleshooting steps for when the display does not turn on.
Troubleshooting steps for excessive distilled water usage.
Troubleshooting steps for unsatisfactory drying results.
Troubleshooting steps for issues related to the distilled water supply.
Troubleshooting steps if the door cannot be opened, even with the emergency button.
Troubleshooting steps for obvious air leakage and water dripping.
To Next Page
