haTmed Q70B - Sterilization Procedure Completed

- 17 -

Fig4.3Manualstop

4.6 Sterilizationprocedurecompleted
Whenthesterilizationprocessendsnormally,theprogramendinterfaceandprogramrunningsuccess
informationaredisplayedonthescreen.Iftheautomaticprintingfunctionissetandtheprinterisconnected,the
productwillautomaticallyprintthesterilizationrecord.Pleasepress toopenthedoor.



Carefulburns！
 Do not forcethedoortoopen.Failuretodosomayresultin
damage to the product and/or hot steam coming out of the
chamber.
 Afterthesterilizationisfinished,waitforawhileuntilthesterilizer
isfullycooledbeforeopeningthedoor.
 Donottouchanymetalsurface.
 Donottouchthesterilizedloadeditems,chamberanddoorcovers
withbarehandstoavoidbeingburned.
 Besuretousethetrayhandletoremovetheloadeditems.
 Balancewhenremoving thetraytopreventthe contentsof the
trayfromslipping.

Damagedpackagingdevicesoritemsmaynotbeeffectivelysterilized,
andexposuretothese items mayendangerthe healthofthe operatoror
patient.
 Ifdamagedpackagingiffound,pleaserepackagetheitem.

 Waiting for 5 minutes after sterilization before removing the
loadeditems,whichisgoodfordryingthesterileitems.
 The 11th edition (2017) of the correct handling method for
medical device cleaning and disinfection issued by the
internationalauthorityAKI,Germany.Itisrecommendedthatthe
wet bag be judged as having water drops remaining on the
packageorinthepackageafter15minutesofsterilization.
 Physical parameters should be monitored for each sterilization
cycle,recordandcheckprocessvariables.Whenthesterilization
temperaturesetinthiscycleis121°C,theholdingtimeshouldbe
nolessthan15minutes.Whenthesterilizationtemperaturesetin