EasyManua.ls Logo

haTmed Q70B - Manual Stop

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 16 -
4.5 Manualstop
Arunningprogramcanbemanuallystoppedatanystage.Ifthesterilizationprocessisstoppedbefore
thestartofdrying,theloadeditemsarenotsterilized.Ifthesterilizationprocedureismanuallystoppedafterthe
startofdrying, the loaded items have beeneffectivelysterilized,butnotfullydried.Inthecaseoffullyloaded
packages,thepossibilityofwetbagsisveryhighandtheseitemscannotbestoredbecauseBecauseasepticstorage
placeshighdemandsonthedrynessofthepackageditems.
After the program is manually stopped, there may be high temperature
steamcomingoutandcausingburnswhenthedoorisopened
Donottouchtheproduct,loadeditems,chamberordoorcover
withbarehands.
Besuretousethetrayhandletotaketheloadeditems.
Manuallystoppingthesterilizationprocessatanearlierstagemaycausean
infection
Ifthesterilizationprocessisstoppedbeforethestartofdrying,the
loaded items are not sterilized Theuseoftheseitemsmay
endangerthehealthoftheoperatorandthepatient.
Ifnecessary,theloadeditemsshouldberepackagedandsterilized.
Ifyouneedtomanuallystopthecurrentprogram,pleasepress (Fig4.3).Aftermanualstop,thescreen
displaystheprogramendinterfaceandmanuallystopsthefaultinformation.Theintelligentcontrollerisprocessed
accordingtothecurrentsituationtoachieveasafepressureinsidethechamberandotherpartsofthedevicealso
ensureasafestate.Afterthedeviceisinasafestate,thecontrollerisallowedtooperatethedooropenbutton,
therequiredtimeandtheprogramrunningstatewhenmanuallystopped,usuallytakesseveralminutes.
134program
P:0BarT:25.0
Doorstatus
00:00:00
Press tostop
theprogram
Programstop
The program stops in
progress…
P:0.85Bar

Table of Contents

Related product manuals