2 Safety notes – Intended use
8
2 Safety notes
2.1 Intended use
BASIC SYSTEM DESIGN PRINCIPLES
BASIC PRINCIPLES The heating system was built using state-of-the-art technology and
conforms to recognised safety regulations. Nevertheless, there is still
a risk of injury or death to users or bystanders, and of adverse effects
upon the heating system or upon other material goods. Have your
specialist heating company provide you with detailed instruc-
tions on the operation of the heating system.
U
SING THE HEATING SYSTEM Only use the heating system when it is in perfect condition. Use it
properly, as intended, be aware of safety and hazards, and observe
the Operating manual. Have any faults which could impair safety
fixed immediately.
This device can be used by children over 8 years old and people with
reduced physical, sensory or mental capabilities or a lack of experi-
ence and knowledge, provided they are supervised or have been in-
structed on the safe use of the device and understand the resulting
risks. Children may not play with the device. Cleaning and user main-
tenance must not be carried out by children without supervision.
BASIC PRINCIPLES FOR THE CONTENT OF THE OPERATING MANUAL
SCOPE The content of this operating manual is intended exclusively for the
planning, installation and operation of the HDG F20-50 boiler. The
further implementation of applicable standards and guidelines, for
example regarding installation of the heating system (pipework,
etc.), is not part of this operating manual. HDG Bavaria does not as-
sume any liability for this.
PROPER AND IMPROPER OPERATION
PURPOSE OF THE HEATING
SYSTEM
The HDG F20-50 boiler is designed for the standard operation of
burning untreated wood, for example in the form of split logs and
pressed wood briquettes in hot-water heating systems.
Any other application is considered improper use. The manufacturer
will accept no liability for any damage resulting from improper use.
The operator bears sole responsibility in such cases.
Proper use includes adherence to the installation, operation and
maintenance requirements specified by the manufacturer.
To Next Page
Loading...