24 / 148
PL
SK
EN
CS
HU
• Prolonged use of the machine may lead to disorders of blood circulation in hands caused by
vibration. These effects can be worsened by low ambient temperatures and/or by gripping
the handgrips excessively tightly. Period of use you can extend with appropriate gloves or
regular breaks. Take frequent work breaks. Limit the amount of exposure per day.
WARNING!B
All starting preventions and controls used in the operator’s presence must be
functional and properly and regularly checked. The mower’s safety systems or
features must not be altered or disposed of.
PREPARATION
• Examine the machine ensure it is in good condition, check all the screws, nuts and other
fasteners are properly secured and the screen is in place. Replace unreadable labels.
• Keep all guards in place and in good working condition.
• Remove accumulated debris from muffler area and cylinder area. Inspect the muffler for
cracks, corrosion, or other damage.
• Check the machine before an each use to determine whether the working tools are not
worn or damaged. Replace worn or damaged parts.
WORK AREA
• Do not operate in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust. Product create sparks which may ignite the dust or fume.
• Check the terrain where you are going to use the machine, and remove any objects that
could be caught, tangled, or discarded (stones, shards of glass, nails, wires, toys, sticks, etc.).
Only operate the machine on a safe surface and only in good light!
• Never use the machine during rain and storms, especially if there is a risk of lightning strikes.
• Never use the machine on a slippery surface. Keep children and bystanders away while
operating the machine. Distractions can cause you to lose control.
• Be careful when using the lawnmower near verges, ditches, or banks. Machine can suddenly
turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.
WORKING ON SLOPES
• Do not mow excessively steep slopes. Danger of injury by overturning machine. Maximum
allowed slope is 15°.
• For wheeled rotary machines, mow across the face of slopes, never up and down.
• Exercise extreme caution when changing direction on slopes.
USING PETROL MACHINES
• When working with a petrol machine never use brute force. The machine, which was
designed for the job, performs it better and safer, therefore always use the correct machine
for a given task.
• The performance of a petrol engine mounted on a particular device, may not achieve gross
output. It is caused by many factors, e.g. the used components (exhaust, charging, cooling,
carburettor, air filter, etc.), usage restrictions, operational conditions of use (temperature,
humidity, etc.) and the differences between individual engines produced.
To Next Page
Loading...
