hecht 587 - Mowing Procedures; Maintenance and Troubleshooting; Care and Maintenance

32 / 148
PL
SK
EN
CS
HU
MOWING
1. Start the motor.
2. Use the throttle to set the motor to the required speed.
3. Press the clutch lever for cutter and keep it pressed.
4. Press the self-drive control handle and keep it pressed.
5. Switch off the motor after completing the work.
INFORMATION ON MOWING
C Ensure that the respective engine ventilation slots do not get clogged with cut
material and as such the engine is no longer cooled sufficiently.
• Clear lawn of debris. Be sure that the lawn is clear of stones, sticks, wire or other foreign
objects which could be accidentally thrown out by the mower. It may cause serious personal
injury to the operator and others as well as damage to property and surrounding objects.
• Steer the product at an even, slow speed (walking pace) in the straightest lines possible.
• Always work across slopes where possible.
• Do not cut wet grass.
• Overlap the mowing lines slightly for an even appearance.
CAUTION!A
If you strike a foreign object, stop the engine. Disconnect wire from spark plug,
thoroughly inspect the mower for any damage and repair the damage before
restarting and operating the mower. Extensive vibration of the mower during
operation is an indication of damage. The mower should be promptly inspected and
repaired. Contact an authorized service center.
WARNING!B
Risk of injury! Do not clean the cutting tool while the engine is running. Switch off
the motor and remove the spark plug connector. Always use aids, e.g. a piece of
wood for removing jammed objects.
CARE AND MAINTENANCE
CAUTION!A
To ensure proper functioning of the machine, it is necessary to have it checked and
adjusted by qualified personnel in an authorized service centre at least once a year.
Proper maintenance is essential for safe, economic and trouble-free operation of the machine.
Failure to follow the maintenance instructions and safety precautions may cause serious injury
or death. Always follow the procedures, safety precautions, recommended maintenance and
recommended checks mentioned in this manual.