26 / 148
PL
SK
EN
CS
HU
• Always follow the principles of first aid in case of any injuries.
• If there is a cut, cover the wound with a clean bandage (fabric) and press down firmly to
stop the bleeding.
• If the skin is burnt, avoid further exposure to the source of burns first. Cool the injured areas
of smaller extend with water of preferably about 4-8 °C. Do not put ointments, creams or
dusting powders on the affected area. The best way is to use a wet compress, for example
a handkerchief or a towel. Then secure the sterile cover and, if necessary, seek medical attention.
• If persons with circulatory problems are often exposed to excessive vibration, they
may experience injury to blood vessels or their nervous system. The vibrations may cause
the following symptoms appear on fingers, hands or wrists: numbness, itching, pain, tingling,
changes in skin colour or of the skin itself. If any of these symptoms occur, consult a doctor.
• Do not let petrol or oil come in contact with your skin. Keep petrol and oil away from
the eyes. If petrol or oil comes in contact with the eyes, wash them immediately with clean
water. If irritation is still present, see a doctor immediately.
• Carbon Monoxide poisoning may lead to death! Early signs of carbon monoxide poisoning
resemble flu-like symptoms such as headaches, dizziness, and/or nausea. If you have these
symptoms, get fresh air at once! If it´s necessary seek medical help.
IN CASE OF FIRE:
• If the motor starts to burn or it the smoke appears from it, turn the product off and move
away to safety.
• To extinguish the fire, use suitable fire extinguisher (froth extinguishing, snow, powder, halotron).
• DO NOT PANIC. Panic can cause even more damage.
RESIDUAL RISKS
• Even if the product is used according to instructions, it´s impossible to eliminate all the risks
associated with its operation. The following risks may occur arising from device construction:
• Heat hazard resulting in burning or scalding and other injuries caused by possible contact
with high temperature objects or materials including heat sources.
• Dangers caused by contact with harmful liquids, gas, mist, smoke and dust or by their
inhalation. (for example breathing in).
• Dangers caused by failing in ergonomic principles by construction of the machine, for example
dangers caused by unhealthy position of body or excessive overcharge and unnature to the anatomy
of the human hand-arm, relate to construction of handle, equilibrium of the machine.
• Danger from unexpected startup or unexpected engine overspeed due to a failure / malfunction
of the control system relating to the failure of the handle and controls positioning.
• Dangers caused by impossibility to stop the machine in best conditions, relate to solidity of
the handle and placing of engine shut down device.
• Dangers caused by defect of machine control system, relate to solidity of the handle, placing
of drivers and marking.
• Dangers caused by shooting up of subjects or splashing of liquids.
• Mechanical hazard, caused by cut and throw off.
• Noise risk resulting in loss of hearing (deafness) and other physiological disorders (e.g. loss
of balance, loss of consciousness).
• Vibration risk (resulting in vascular and neurological harm in the hand-arm system, for
example so called “white finger disease”).
• Danger of fire or explosion relate to spilling of fuel.
To Next Page
Loading...
