Readjust the camera as needed.
The Ultra-Widefield lens may touch the patient's ocular orbit but
not the patient's eye. For further information on safe handling of
the Ultra-Widefield lens, please refer to (° 5.2 “Examining Patients
with Deep-seated Eyes or Small Orbits”, p. 19).
Watch the live image.
Keep the hands on the device and readjust the camera as needed.
On the touch panel, press “Acquire” if the fluorescence is visible.
A ticking sound is audible during the movie acquisition.
To stop the acquisition of the movie, press “Stop” on the touch
panel.
Fig. 6: Acquisition window with ART Mean activated
To acquire images with ART Mean, press
on the touch panel.
ART Mean is activated. The small live images are displayed. The
gray progression bar increases as the ART Mean counts to 100
frames.
Images can be acquired before ART Mean reaches the
adjusted number of frames. Under certain circumstances, e.g.
nystagmus, ART Mean processing might fail. In these cases,
acquire images without ART Mean.
Watch the small live images for an even illumination.
Keep your hands on the device and readjust the camera as
needed.
On the touch panel press “Acquire” .
The image is acquired.
To acquire several images, press “Acquire” again.
On the touch panel press
.
ART Mean is switched off.
Acquiring images
Acquiring Images
Acquiring Images
5
© Heidelberg Engineering GmbH, Article No. 230134-002 INT
29
To Next Page
Loading...
Need help?
General