HEIDENHAIN TNC 426 B

12 MOD Functions
302
Software for data transfer
For transfer of files to and from the TNC, we recommend using the
HEIDENHAIN TNCremo data transfer software. With TNCremo, data
transfer is possible with all HEIDENHAIN controls via serial
interface.
Please contact your HEIDENHAIN agent if you would like
to receive the TNCremo data transfer software for a
nominal fee.
System requirements for TNCremo
■
AT personal computer or compatible system
■
640 KB working memory
■
1 MB free memory space on your hard disk
■
One free serial interface
■
Operating system MS-DOS/PC-DOS 3.00 or later, Windows 3.1 or
later, OS/2
■
A Microsoft-compatible mouse (for ease of operation, not
essential)
Installation under Windows
ú
Start the SETUP.EXE installation program in the file manager
(explorer)
ú
Follow the instructions of the setup program
Starting TNCremo under Windows
Windows 3.1, 3.11, NT:
ú
Double-click on the icon in the program group HEIDENHAIN
Applications
Windows 95:
ú
Click on <Start>, <Programs>, <HEIDENHAIN Applications>,
<TNCremo>
When you start TNCremo for the first time, you will be asked for the
type of control you have connected, the interface (COM1 or COM2)
and the data transfer speed. Enter the necessary information.
12.4 Setting the Data Interfaces
Okap12.pm6 30.06.2006, 07:04302
www.EngineeringBooksPdf.com