44
4 Programming: Fundamentals of NC, File Management,
Programming Aids, Pallet Management
3rd step: select a file:
Press the SELECT TYPE soft key
Press the soft key for the desired file type, or
To display all files, press the SHOW ALL soft key
or
4*.H
use wild card characters, e.g., to show all files of
the file type .H that begin with 4.
Move the highlight to the desired file in the right window
<
or The selected file is opened in the
operating mode from which you have
the called file manager: Press ENT or
the SELECT soft key.
To create a new directory (only possible on the
TNC's hard disk drive):
Move the highlight in the left window to the directory in which
you want to create a subdirectory.
<
NEW
Enter the new file name, and confirm with ENT.
Create \NEW directory ?
<
Press the YES soft key to confirm, or
the NO soft key to abort.
4.4 File Management with Additional Functions
Ekap4.pm6 30.06.2006, 07:0344
www.EngineeringBooksPdf.com
To Next Page
Loading...
