HEIDENHAIN TNC 426 B

To Next Page

To Previous Page

49HEIDENHAIN TNC 426 B, TNC 430

Data transfer to or from an external data medium

Before you can transfer data to an external data medium,

you must set the interface (see „Section 12.4 Setting the

Data Interfaces“).

Calling the file manager

Select the screen layout for data transfer: press

the WINDOW soft key. In the left half of the

screen, the TNC shows all of the

files that are

stored on the TNC, and in the right half of the

screen, all of the files that are stored on the

external data medium.

Use the arrow keys to highlight the file(s) that you want to

transfer:

Move the highlight up and down within a

window

Move the highlight from the left to the right

window, and vice versa.

If you are transferring from the TNC to the external medium,

move the highlight in the left window onto the file that is to be

transferred.

If you are transferring from the external medium to the TNC,

move the highlight in the right window onto the file that is to be

transferred.

Transfer a single file: Press the COPY soft key, or

To transfer several files, use the

TAG soft key (in the second soft-key row, see

also Tagging functions earlier on in this chapter),

transfer all files by pressing the TNC EXT soft

key

4.4 File Management with Additional Functions

Ekap4.pm6 30.06.2006, 07:0349

HEIDENHAIN TNC 426 B - Page 65