50
4 Programming: Fundamentals of NC, File Management,
Programming Aids, Pallet Management
Confirm with the EXECUTE or with the ENT key. A status
window appears on the TNC, informing about the copying
progress, or
If you wish to transfer more than one file or longer files,
press the PARALLEL EXECUTE soft key. The TNC then copies the
file in the background.
<
To end data transfer, move the highlight into left
window and then press the WINDOW soft key.
The standard file manager window is displayed
again.
To select another directory, press the PATH soft key and
then select the desired directory using the arrow keys
and the ENT key!
4.4 File Management with Additional Functions
Ekap4.pm6 30.06.2006, 07:0350
www.EngineeringBooksPdf.com
To Next Page
Loading...
