HeimVision HM243 - Remote Operation and Software; PC Software Operation (EseeCloud); PC Software Setup Steps

13
• Channel setup: change the name of the camera, check the Bitrate, etc.
• System Admin: check the system version, update the system, User and password
setup, make a factory reset and check the system log, etc.
Color adjust:
Select it to adjust the brightness, contrast and sharpness of each channel.
PTZ Control: Select to pan/tilt/zoom, this NVR does not support the function.
Setup Wizard:
Show the QR code to download the app and show the Cloud ID.
Fast network:
Configure the network.
Exit System:
Log out, reboot and shut down the system, etc.
OPERATE NVR SYSTEM FROM ESEECLOUD ON PC
Notice:
• https://www.heimvision.com/download/Cameras is the link for downloading
EseeCloud or you can contact our HeimVision service team to get the installation
link.
• Your Cloud ID can be found in Network Setup.
• Please make sure that your NVR is Internet connected through the ethernet cable,
and the status of your network is Healthy Network.
EseeCloud Login
Step 1:
Double click EseeCloud_Setup.exe to install and then run the software.
Step 2:
Log in to EseeCloud Client with the default User Name (admin) and password (empty,
namely enter nothing) if you did not set any password.