2 General
Positioner DC 6-06 11
The method of operation of the DcDesk 2000 communication program as either a local or
remote communication variant will be found in the following publications or in the
programs' online help.
Title Order Number
Operating instructions communication program DcDesk 2000 DG 00 003-d
Basic information remote communication program
DcDesk 2000/Saturn
DG 05 008-d
Basic information remote communication program SATURN DG 05 006-d
Table 4 Communication programs
2.4 Conventions
The following typographical conventions are used in this brochure:
1911 ServoGain Parameter names are always shown in italics. No
distinction is made between the four
2.5 Parameter
Lists.
1911 ServoGain An arrow with a parameter means that the parameter is
explained in detail elsewhere. A brief description of the
parameter can be found in Chapter
11 Parameter
Description which also gives page references to the
detailed description of the parameter.
<1911> In drawings, numbers in angle brackets are used when the
point being described corresponds to a parameter number.
An arrow followed by text in italics refers to a chapter in
which a function is described in detail.