7 Technical data
Positioner DC 6-06 39
7 Technical data
The PANDAROS system is based on type DC 6 control units.
The following technical data apply to the positioner control units.
7.1 General
Nominal voltage 12 V DC or 24 V DC
Min. voltage 9 V DC (short-time for starting)
Max. voltage 32 V DC
Current consumption max. 7 A, max. 11 A for max. 60 seconds
Control unit fusing 12 A
Storage temperature -40 °C to +85 °C
Operating temperature -40 °C to +80 °C
Humidity up to 98 % at 55 °C, condensing
Vibration resistance max. ± 1.75 mm at 10 to 21 Hz
max. 0.24 m/s at 21 to 45 Hz
max. 7 g at 45 to 400 Hz
Shock 30 g, 11 ms - half-sine
Degree of protection IP 20
Insulation resistance > 1 M
at 48 V DC
Weight approx. 0.5 kg
ESD IEC 61000-4-2 6 kV contact discharge
8 kV air discharge
EMC IEC 61000-4-3 Electromagnetic fields:
80 MHz - 2 GHz (3 s/dec)
IEC 61000-4-4 Burst: 2 kV supply leads / 1 kV signal
IEC 61000-4-6 Conducted high-frequency EMI:
150 kHz - 80 MHz (3 V
rms
)
IEC 61000-4-5 Surge: 0.5 kV signal/signal, 1 kV signal/frame
CISPR 16-1 / 16-2 Conducted emissions,
Radiated emissions from enclosure port:
10 kHz - 30 MHz (conducted)
150 kHz - 2 GHz (emitted)
156 – 165 MHz (24 dB µV/m)
To Next Page
Loading...
Need help?
General