Heinzmann PANDAROS DC 6-06 User Manual

8 Actuator and feedback
Positioner DC 6-06 55
Once the servo loop settings have been completed in test mode, they must be checked with
the system running and adjusted if necessary. Owing to vibration, the friction moment may
be significantly less and other parameter settings than in a static system may be required.
In extreme cases this can even result in a situation where the actuator positions very poorly
when the system is stopped but produces very good control results when the system is
running.

Heinzmann PANDAROS DC 6-06 Specifications

General

Brand	Heinzmann
Model	PANDAROS DC 6-06
Category	Valve Positioners
Language	English