Attention
When checking the electrical system, turn off key switch and emergency isolation
switch.
3.2 Norms for safe driving:
Check safety conditions around the truck
Attention
Before start the truck ,make sure there is nobody around.
Attention
When transporting bulky cargo which blocks your sight, please drive reversely or be
guided by another person.
Attention
When driving reversely, make sure there is nobody around the truck.
Attention
When travel in narrow aisles, it must be guided by another person.
Attention
At crossroads or other sight-blocked places, the driver should park and start again after
confirming that there is nobody around the truck.
Attention
Be concentrated while driving and operating.
Caution
Different from normal trucks, the driving mechanism of this truck is installed at the
front end of the truck. When turning, the swing speed at the front will be relatively higher,
therefore, when the front end of the truck approaches other objects, make sure to drive or
turn slowly to prevent collision.
Brutal driving is strictly prohibited
Attention
Do not start, brake or steer suddenly.
Attention
Conform to all the safety regulations of the working sites. When driving by other
trucks, decelerate and honk the horn. Do not drive in sight-blocked places.
To Next Page
Loading...
