HELI OPSM - Page 9

Attention
Do not drive the truck when you feel tired, not concentrated, or have adopted
anesthetics or drunk.
Please conform to safety norms when operate and repair the truck.
Safety of working sites:
Attention
The electric truck is only designed for hard and flat indoor ground; never use it in a
flammable or explosive environment or a corrosive environment like acid or alkali.
Keep paths in good conditions; the paths shall not be blocked.
The working sites should be well-lighted.
Places where the truck is to be used and charged must be equipped with firefighting devices. Fire
extinguishers must live up to putting out fire of solid combustibles and electric parts.
The noise level in this manual refers to the tested value of a new truck working on a flat, smooth and hard
ground; if your ground is not in good condition or the wheels are damaged, the noise level will be higher.
Ensure integrity of truck:
Warning
Do not modify the truck
When operate, check and repair the truck, please conform to the safety norms and norms of your working
site.
Without written permission of our company, it is not allowed to modify the truck. Modifications on the truck
may influence its safe operations. Without written permission of the original manufacturer, authorized agents
or its commissions, never modify an electric industrial truck on the condition that it may influence the truck
load capacity, stability or safety requirements. Such influence includes the truck braking performance,
steering, visibility and adding additional devices. When any modification is approved by the manufacturer or
its agents, the capacity plate(s), decals, tags and instruction handbook shall also be modified accordingly.
Only in the event that the truck manufacturer is no longer in business and there is no successor
interested in the business may the user arrange for a modification or alteration to a truck, provided,
however, that the user:
arrange for the modification or alteration to be designed, tested and implemented by engineer(s) expert in
industrial trucks and their safety;
maintain a permanent record of the design, test(s) and implementation of the modification or alteration;
affix a permanent and readily visible label to the truck stating the manner in which the truck has been
modified or altered together with the date of the modification or alteration, and the name and address of the
organization that accomplished the tasks.
Set up procedures for safe operations：
Before using the truck, please set up safe operation procedures according to actual situations. When
setting up working procedures, please fully consider the element of safety.
Never operate the truck under unsafe conditions:
Never use the truck where the ground is uneven, the path is blocked or other unsafe elements exist; never
lift the truck on a ramp.
Never use a faulted truck.
Make sure to inspect the truck every day; if any abnormal situation is discovered, please repair or make
replacement.
Overloading is strictly prohibited:
Warning
Never overload, otherwise it will damage the truck or injure human bodies.
Check electrical system:
5