Need help?Do you have a question about the HELIX P SIX DSP MK2 and is the answer not in the manual?
General| Channels | 6 |
|---|---|
| Amplifier Class | D |
| DSP Processing Power | 295 MHz |
| THD+N @ 4 Ohms | < 0.05% |
| Total Harmonic Distortion | < 0.05% |
| Signal-to-Noise Ratio | > 100 dB |
| Damping Factor | > 200 |
| Highlevel Inputs | Yes |
| Fuse | 30 A |
| Crossover | Yes |
| RMS Power (2 Ohms) | 150W x 6 |
| Bridged RMS Power (4 Ohms) | 3 x 300 Watts |
| Input Impedance | 10 kOhm |
| Input Sensitivity | 0.2 - 4 V |
| Digital Inputs | 1 x Optical |
| Frequency Response | 10 Hz |
| Dimensions (W x H x D) | 7.5 x 2.5 x 10.5 inches |
To Next Page
