EasyManua.ls Logo

HelloBaby HB2688 - Replace Battery; Connecting the Base Station

HelloBaby HB2688
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
3.2. Replace battery
1. Slide down to open the battery compartment cover.
2. Place the 2 supplied rechargeable batteries as indicated. Pay extra
attention to direction of polarity.
3. Slide the battery compartment cover back.
4. Put the handset on the base and charge for 15 hours before using
thehandsetforthersttime.Thehandsetwillgiveabeepwhenitis
properly placed on the base or charger.
NOTES:
1) Use only the supplied NiMH rechargeable battery cells.
2) If the handset will not be used for a long time, disconnect and remove
the Battery pack to prevent possible leakage.
3.3. Connecting the Base Station
1. Plugoneendofthetelephonelinecordintothetelephonejackon
base bottom.
2. Plugthesmallendofpoweradapterintoapowerjackonbasebottom.
3. Plug the large end of power adapter into a wall power outlet.
4. Plugtheotherendofthetelephonelinecordintothetelephonejack.
5. Always use the cables provided in the box.

Table of Contents

Related product manuals