16
4. BEFORE USE
4.1. Check for dial tone
Press . If you hear a dial tone, the installation is successful.
If you do not hear a dial tone:
• Make sure the installation procedures described above are properly done.
• It may be a wiring problem. If you have changed your telephone service
to digital service from a cable company or a VoIP service provider, the
telephonelinemayneedtoberewiredtoallowallexistingtelephonejacks
to work. Contact your cable/VoIP service provider for more information.
4.2. Operating range
This cordless telephone operates with the maximum power allowed by the
Federal Communications Commission (FCC). Even so, this handset and
telephone base can communicate over only a certain distance - which can
vary with the locations of the telephone base and handset, the weather, and
thelayoutofyourhomeoroce.
When the handset is out of range, the handset displays Out of range.
If there is a call while the handset is out of range, it may not ring, or if it
does ring, the call may not connect well when you press . Move closer
to the telephone base, and then press to answer the call. If the handset
moves out of range during a telephone conversation, there may be
interference. To improve reception, move closer to the telephone base.
5. CONFIGURE YOUR TELEPHONE
5.1. Using the handset menu
1. Press when the phone is not in use.
2. Press or until the screen displays the desired feature menu.
3. Press to enter that menu.
• To return to the previous menu, press on the handset.
• To return to idle mode, press and hold on the handset.
5.2. Set language
The LCD language is preset to English. You can select English, French or
Spanish to be used in all screen displays.
1. Press when the phone is not in use.
2. Press or to choose HS SETTINGS, and then press .
3. Press or to choose LANGUAGE, press .
To Next Page
Loading...