HelloBaby HB2688 - Registration, Reset, and Troubleshooting

33
• Re-enter the new system PIN code, then press toconrm.
NOTE: If PIN correct, handset will go to next step. If PIN incorrect, handset
will go back to previous level.
13.5. ECO Mode
This power conserving technology reduces power consumption for optimal
battery performance.
• Repeat Step 1 to 3 of Section 13 to select ECO MODE, press .
• Press or to select ON/ O, then press toconrm.
13.6. Home area code
The phone can be store the home area code for CID view dialing option.
• Repeat Step 1 to 3 of Section 13 to select AREA CODE, press .
• Edit or enter home area code, then press toconrm.
14. REGISTRATION
The phone can be registered up to FIVE handsets to a single base station.
The handset is not registered to the base station, REGISTER is shown on
display.
To register new handset:
• Press and hold on the base station for about 8 seconds, the base
station is entered into registration mode.
• Press to enter menu, then or to select REGISTRATION.
REGISTRATION, press and 4-digist system PIN code need to enter,
then press toconrm.
Ifthehandsetregistrationissuccessful,aconrmationtonewillbeheard.
The handset will be assigned automatically to the next available handset
number. Handset number shows in the handset display during standby
mode.