NETLink
®
Ethernet Products
The ensuing reset would interrupt the NETLink
®
link
• All NETLink
®
Gateways be protected against unauthorized
reparameterization via a password.
If an attempt is made to save a parameter set with an incorrect
password, the following messages is displayed:
• If the password is correct during parameterization, the new pa-
rameter set will be saved and the following message displayed:
• The NETLink
®
is now restarted. This can take up to 15 seconds.
5.2.1 Creating a station
The ‘New’ button takes you to an input dialog box in which you
can store the known IP address of an existing NETLink
®
device
and any name for easier assignment.
To able to access a NETLink
®
with the NETLink-S7-NET driver, a
station must be set up first. This station is virtually and is not
stored in the NETLink
®
Gateway hardware – it permits easier
differentiation if several NETLink
®
devices from the NETLink
®
family are used.
Alternative ports can be set with the option "Internet teleservice".
If, for example, several NETLink® devices are located in a network
The password query must
be answered correctly and
confirmed with OK.
Rebooting can take up to 15
seconds.
The NETLink has the IP
address 192.168.4.49 on
delivery from the factory.
The default password is
‘admin.’
To Next Page
Loading...
