Helmholz NETLink 700-881-MPI21 User Manual

32 NETLink
®
Ethernet Products
A password that you have already set can be changed here. The
configuration of the NETLink® can only be changed with the
help of the password.This applies to parameterization both via
the driver and via the web interface.
Clicking the ‘Save in NETLink
®
’ button saves the parameters in
the NETLink
®
device in this case, too.
5.3 Options of the driver
Under the options of the NETLink-S7-NET driver, it is possible to
set the language of the output and help texts of the driver.
It is also possible to read out the version numbers of the driver
files used.
5.3.1 Language setting of the display elements
The languages German and English are currently available.
After switching over the language, the setting window must be
opened again to apply the changes.
5.3.2 Version information
The names and version number of all driver files are listed here.
If support is needed, this data is used to obtain information about
the components used quickly and effectively.

Helmholz NETLink 700-881-MPI21 Specifications

General

Brand	Helmholz
Model	NETLink 700-881-MPI21
Category	Gateway
Language	English