Helmholz NETLink 700-881-MPI21 - Page 5

NETLink
®
Ethernet Products
5
5.1.1 MPI 22
5.1.2 PROFIBUS configuration 23
5.1.3 PPI configuration 26
5.2 Local connection (TCP parameterization) 26
5.2.1 Creating a station 27
5.2.2 Setting TCP parameters 29
5.2.3 Operation without the DHCP 30
5.2.4 DHCP 31
5.2.5 Additional features 31
5.3 Options of the driver 32
5.3.1 Language setting of the display elements 32
5.3.2 Version information 32
5.4 Diagnostics 33
5.4.1 Bus members 33
5.4.2 Bus parameters 33
6 The Tool: ‘NETLink
®
PRO Family Configuration’ 35
7 Possibilities of the Web Interface 36
7.1 Home Page 36
7.2 Setting up access 36
7.3 Status Page 37
7.4 Configuration page 37
7.5 Security page 38
7.6 Observing variables 39
7.7 NETLink
®
WLAN configuration 39
7.7.1 NETLink
®
WLAN in the infrastructure mode (AP) 39
7.7.2 NETLink
®
WLAN in the ad hoc mode 40
7.7.3 Connection establishment PC to NETLink
®
WLAN in the
unencrypted ad hoc mode 40
7.7.4 Connection establishment PC to NETLink
®
WLAN in the
encoded ad hoc mode 42
8 RFC1006-Function (S7-TCP/IP) 46
8.1 CPU Addressing with Rack/Slot and TSAP 46
9 Bus Parameters in Single Master Operation 48
9.1 Storing specified bus parameters 48
9.2 Addressing with Routing over RFC 49
9.2.1 RFC Multicomputing with TSAP 50
9.2.2 RFC Routing over CP with TSAP 50
10 Troubleshooting 52
11 Appendix 56