MBX-4 User Guide
19
Installing the Receiver
To ensure optimum receiver performance and ease of operation, you
should consider the information presented in the following sections
when installing the MBX-4 receiver.
Receiver Placement
When selecting a location to install the receiver, you should ensure that:
• The receiver is within reach of power, data, and antenna cable
connections.
• Sufficient room is available at the back of the receiver to
connect and disconnect the power, data, antenna, and ground
cables if required.
• Once you have installed the receiver, cables will not be bent or
pinched as the receiver is tilted up or down.
• You have a clear view and access to the receiver’s front panel,
to monitor the receiver status, if you require
Environmental Considerations
The MBX-4 is designed to operate within enclosed environments where
the temperature remains between -22° F and 158° F (-30° C and +70° C
and relative humidity is less than 95 percent. It may be stored between
-40° F and +176° F (-40° C and +80° C).
To Next Page
Loading...
