Hemisphere GPS MBX-4 - Set to Automatic Beacon Search Mode; Change Display Mode

56
3: MBX-4 Configuration and Operation
• Scroll with the or keys until the desired continent is
displayed then press .
• Scroll with the or keys until the desired country is displayed
then press .
• Scroll with the or keys until the name of the specific beacon
is displayed then press .
Set to Automatic Beacon Search Mode
To set the receiver to ABS mode (Refer to Figure 3-4):
• Navigate to Auto Bx Search in the Setup menu and press .
-or-
• Navigate to Tune in the Setup menu and press .
• Scroll with the or keys until Auto/Auto is displayed and
press .
The previous method erases any previous search information, while the
later method does not.
Change Display Mode
To change display mode (Refer to Figure 3-4):
• Navigate to Options in the Setup menu and press .
• Scroll with the or keys until XBX3 Mode is displayed and
press .