36
3: MBX-4 Configuration and Operation
Factory Default Settings
Table 3-1 presents the factory default MBX-4 operation settings, while
Table 3-2 lists the default communication settings. These operation and
port settings are valid upon initial power-up. The MBX-4 maintains any
changes made to its operation or port settings for subsequent power-
up.
Note: The changes you make to the MBX-4 configuration are saved
in memory for subsequent power-up.
Table 3-1: Default MBX-4 Operating Settings
Tune Mode Display Mode
Automatic MBX-4
Table 3-2: Default MBX-4 Port Settings
Baud Rate
Data
Bits
Parity Stop Bit
Interface
Level
P1-Main: 4800 8 None 1 RS-232C
To Next Page
Loading...
