62
4: NMEA 0183 Interface
MBX-S Supported Messages
The MBX-4 supports the NMEA commands and queries listed in
Table 4-2.
Table 4-2: MBX-4 Supported NMEA Messages
Message Description Description
Commands
$GPMSK (Full Manual Tune) Sets the receiver into Full Manual Tune Mode
$GPMSK (Partial Manual Tune) Sets the receiver into Partial Manual Tune Mode
$GPMSK (ABS Mode) Sets the receiver into Automatic Beacon Search Mode
$PCSI,4 (Proprietary) Erases the Global Search table forcing a new search
$PCSI,5 (Proprietary) Reserved (Factory use only)
$PCSI,6 (Proprietary) Sets the internal and external MBX-4 baud rates
$PCSI,7 (Proprietary) Sets the display mode of the MBX-4 receiver
$PSLIB (Proprietary) Sets the frequency and MSK bit rate of the MBX-4
Queries
$GPCRQ Operation Query Queries the receiver for operation parameters
$GPCRQ Performance Query Queries the receiver for performance parameters
$PCSI,0 (Proprietary) Lists available proprietary $PCSI commands and queries
$PCSI,1 (Proprietary) Reserved
$PCSI,2 (Proprietary) Reserved
$PCSI,3 (Proprietary) Reserved
To Next Page
Loading...
