Hemisphere GPS Vector V113 - Page 22

V103/113 Vector User Guide Chapter 2-Installation Page 18 of 35
Table 2-1 shows the requested PGNs with the V103/113 in NMEA 2000 mode.
Table 2-1: Received Messages based on Request
PG No.
(PGN)
Description Level
Default Update Rate
(msec)
Freq (Hz)
059392 ISO Acknowledgement
Used to acknowledge the status of certain
requests addressed to a specific ECU.
B
On Request On Request
059904 ISO Request
Request the transmission of a specific PGN,
addressed or broadcast.
B
On Request On Request
060928 ISO Address Claim
Used to identify to other ECUs the address
claimed by an ECU.
B
On Request On Request
126996 Product Information
NMEA 2000 database version supported,
manufacturer’s product code, NMEA 2000
certification level, Load Equivalency number, and
other product- specific information.
B On Request On Request
126464 Receive/Transmit PGNs group function
The Transmit / Receive PGN List Group type of
function is defined by first field. The message will
be a Transmit or Receive PGN List group function.
B
On Request On Request
129538 GNSS Control Status
GNSS common satellite receiver
parameter status.
B
On Request On Request
129545 GNSS RAIM Output
Used to provide the output from a GNSS receiver's
Receiver Autonomous Integrity Monitoring (RAIM)
process. The Integrity field value is based on the
parameters set in PGN 129546 GNSS RAIM
Settings.
B On Request On Request
129546 GNSS RAIM Settings
Used to report the control parameters for a GNSS
Receiver Autonomous Integrity Monitoring (RAIM)
process.
B
On Request On Request