To Next PageTo Next Page
Need help?Do you have a question about the Heraeus UT6200 and is the answer not in the manual?
Essential safety warnings and important operational advice for users.
Instructions for electrical connection and required fusing.
Overview of temperature control devices and settings.
Explanation of safety features for temperature limits.
Function and operation of the main oven power switch.
Operation and features of the Heratherm mechanical controller.
Procedure for setting the desired working temperature on the Heratherm.
Overview of the Digicon electronic temperature controller.
Details on the Digicon S controller and its interface.
Explanation of ovens without direct overtemperature protection.
Characteristics and restrictions of thermal safety class 0.
How the temperature limit cut-out operates and protects the oven.
Method for setting and calibrating the temperature limit cut-out.
Step-by-step instructions for configuring the limit cut-out.
Recommended procedure for testing the limit cut-out's functionality.
Operation and purpose of the temperature limit controller.
Function of the controller for excess and insufficient temperatures.
Procedure for setting the upper temperature limit for protection.
Procedure for setting the lower temperature limit for protection.
Recommended testing for upper/lower limit safeguard functionality.
Procedure for setting the target temperature on the controller.
Specifics of thermal safety class 0.
Specifics of thermal safety class 1.
Specifics of thermal safety class 2.
Specifics of thermal safety class 3.
Specifics of thermal safety class 3.1.
Specifics of thermal safety class 3.2.
Specifics of thermal safety class 3.3.
Rated voltage, frequency, current, and power consumption.
Detailed pinout for the 25-pin D-Sub connector for RS 232.
General
