EN – Translation of the original user manual - 1.1 | 2022
MAINTENANCE
GATE MAINTENANCE
Under normal conditions and with regular maintenance, Delta and uGate sliding
gates have a life of at least 200,000 cycles and 50,000 for Axel sliding gates. To
ensure that your gate operates safely, reliably and in compliance with all relevant
legislation and laws, we recommend a MINIMUM of one maintenance check every
12 months.
Any maintenance work, including repair, replacement, modification and upgrade
MUST be conducted by a Heras trained, qualified, competent and certified techni-
cian using Heras approved tools and spare parts.
Failure to ensure that the gate is used in accordance with User manual provided, or
any faults or damage caused by wilful misuse, will result in any warranty becoming
void.
During maintenance, essential points of the sliding gate must be periodically
checked using an inspection protocol.
• Correct operation and adjustment.
• Check all anchor and bolted connections.
• Check wear of running wheels, guide wheels and the surface on which they
run
• Check welded joints, damage to coating and zinc
CLEANING
The gate can be cleaned using a non-aggressive detergent and a soft cloth, brush
or sponge. Avoid using a pressure cleaner as this might damage the gate.
Lubricating the running surface of the gate is not allowed.
To Next Page
Loading...