EN – Translation of the original user manual - 1.1 | 2022
DECOMMISSIONING AND REMOVAL
Ensure that the gate is dismantled by a qualified technician.
Use the installation manual.
At the end of their service lives the products must be disposed of in accordance
with all local, regional and national rules and instructions. The sliding part is mainly
made of aluminum and steel parts. The guideposts are made of steel.
Heras is also happy to take the products back and then dispose of them in an ap-
propriate manner.
The Delta and uGate gates have highly tensioned cables fitted in the bottom rail. If
these cables are cut, they can snap with great force. This can lead to serious inju-
ry. Therefore, it is prohibited to disassemble the bottom rail yourself.
!! Only people trained by Heras are allowed to disassemble the bottom rail.
There is no hidden danger associated with dismantling the bars, top rail and stiles.
The points that are fitted to some sliding gates are sharp. There is a danger of be-
ing cut when disassembling such a gate. Wear suitable gloves.
SPARE PARTS
cylinder nr 1 euro 2 keys dbl
cylinder nr 2 euro 2 keys dbl
cylinder nr 3 euro 2 keys dbl
cylinder nr 5 euro 2 keys dbl
cylinder nr 6 euro 2 keys dbl
cylinder nr 8 euro 2 keys dbl
cylinder nr 3 euro 2 keys sgl
cylinder nr 8 euro 2 keys sgl
To Next Page
Loading...
