8/32 – User Manual
5. OUTPUT OPTIONS
Two types of connectors are available for connecting speakers: RCA and ¼" jack. All of these
connectors are mono outputs, each of which corresponds to one channel (left and right). The
RCA connectors are meant for connecting standard gear, while the ¼" jack connectors are meant
for connecting professional gear, such as a Public Address (PA) system.
Select the type of connector according to the type of equipment you will be connecting. Normally,
outputs 1-2 will be used for your live mix playing in the room, and outputs 3-4 will be used for
monitoring or connecting an external mixer. The outputs 3-4 connectors and the headphone jack
always output the same audio data.
5.1. Connecting speakers and/or an external mixer to your DJ
Console Rmx
With the included VirtualDJ software, the 4 mono RCA connectors (outputs 1, 2, 3, 4) let you play
your mix for the audience at the standard -10dBv level over a hi-fi system connected to outputs 1-
2 on your DJ Console Rmx, for example, and preview upcoming songs on your headphones or
via outputs 3-4.
The 4 mono ¼ ” unbalanced jack connectors (outputs 1, 2, 3, 4) let you play your mix for the
audience at the professional +4dBu level over a PA system connected to outputs 1-2 on your DJ
Console Rmx, for example, and preview upcoming songs on your headphones or via outputs 3-4.
This choice of outputs gives you the freedom to do more with your music. For example, you can:
Connect the ¼” jack outputs to a PA system to play the mix for the audience while simultaneously
connecting the RCA outputs to the audio line input on another computer to broadcast the mix
online; or
Play Deck A on outputs 1-2 and Deck B on outputs 3-4 (with VirtualDJ 5 PRO or another
application) and export the mix to an external mixer.
- Make sure that your computer and other audio equipment is switched off before connecting it.
- Connect your main set of speakers to the Output 1-2 RCA plugs (plug 1 corresponds to the left
speaker, plug 2 to the right speaker) or to the Output 1-2 ¼” jack plugs.
- If you have a second set of speakers (monitoring speakers, for example), connect the speakers
to the Output 3-4 RCA plugs (plug 3 corresponds to the left speaker, plug 4 to the right
speaker) or to the Output 3-4 ¼” jack plugs. You can also connect an external mixer to these
plugs.
Your speakers and/or external mixer are now ready for use with your DJ Console Rmx.
To Next Page
Loading...
Need help?
General
