EasyManua.ls Logo

Heritage 023760 - Auto Shut off; Cooling Mode

Heritage 023760
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
TIME AND TEMPERATURE RESET
Press the button and the sous vide precision cooker will stop working. The display
will indicate the setting time and temperature. To set a new time and cooking
temperature, repeat steps above in the PREHEATING MODE and the COOKING
MODE SECTIONS to set a new time and temperature.
NOTE: Do not pause cooking for more than 1 or 2 minutes to avoid cooling
temperature of the water bath.
AUTO SHUT-OFF:
The sous vide precision cooker is equipped with an auto shut-off safety device.
Intelligent water-level sensors will immediately turn the heating elements off if the unit
is removed from the water or if the water falls below the minimum water level.
COMPLETED
Once cooking stage is completed, the appliance will “beep” 3 times. The time
countdown is finished, and the display will indicate “End”. The appliance will not stop
working. It will keep warm 1 hour and the timer will run up to an hour. After an hour,
the appliance will stop working and circulating water timer will turn to off.
WHEN COOKING IS COMPLETED:
1. Turn off and unplug appliance.
2. Remove sealed foods using tongs and place on a plate.
3. After, food is removed let water cool. Remove the precision sous vide cooker by
releasing adjustable holding clamp and follow recommended cleaning instructions
(see cleaning section)
4. Discard cooking water after
it is fully cooled.
WINE COOLING FUNCTION
COOLING MODE
1. Connect the power plug into wall outlet. A “beep” will sound. By default,
flashes in the control panel. Press the button to select the WINE COOLING
which is ideal to cool wine.
default time is pre-set to 01:00 (1 hour) and real temperature is
indicated.
NOTE: Temperature cannot be adjusted during cooling function. Real temperature
will display.
2. Press the
the
To create an ice bath, place the Sous vide precision
cooker into a container of water. Be sure the water
level does not go over the max marking. Slowly
drop ice cubes into the container and the water
temperature will start to drop. Circulating the water in
the container will help to cool more quickly.

Related product manuals