HermanMiller Caper User Manual

Z
© 2015 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Caper are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b9rtf rev A.
1
Table of Content
1. Multipurpose Chair Disassembly ....................................................................... 2
2. Footring Disassembly ........................................................................................ 8
3. Stacking Chair Disassembly ............................................................................10
4. Tablet Arm Disassembly ..................................................................................12
5. 4 Leg Stool Disassembly .................................................................................13
Y
Caper
®
Disassembly for Recycling Instructions

HermanMiller Caper Specifications

General

Type	Chair
Weight Capacity	300 lbs
Seat Material	Polypropylene
Height	31.5 inches
Warranty	12-year warranty
Material	Polypropylene
Features	Stackable
Base Material	Nylon
Color Options	Various, including Black, White, and Gray

Summary

Multipurpose Chair Disassembly

Remove Chair Casters

Hold the base and pull firmly to remove the caster from the base.

Separate Base from Cylinder

Use a socket to strike and dislodge the base from the pneumatic cylinder.

Remove Seat Assembly

Detach the seat assembly from the tilt mechanism.

Footring Disassembly

Remove Chair Casters

Hold the base and pull firmly to remove the caster from the base.

Separate Base from Cylinder

Use a socket to strike and dislodge the base from the pneumatic cylinder.

Remove Footring

Lift the footring from the pneumatic cylinder and pull it off.

Stacking Chair Disassembly

Remove Chair Arms

Depress sping pin from arm end and pull arm out of back frame post.

Remove Chair Back

Pull the back off the frame posts.

Remove Seat

Remove the seat from the frame.

Tablet Arm Disassembly

Remove Tablet Arm Cover

Remove the cover to the tablet using seven pan head screws.

Takeout Tablet Arm and Cover

Remove the tablet arm and its cover from the chair assembly.

4 Leg Stool Disassembly

Remove Stool Seat

Remove the seat from the stool frame.

Remove Seat Bumpers

Remove bumpers from the bottom of the stool frame.