1-4 Safety
Locations (2): One is on the top door and visible under normal operation. The other is located
inside the laser system on the back panel, visible when the top door is opened.
Locations (3): One is next to the Beam Window where the laser beam enters the engraving area
inside the laser system and is visible when the top door is opened. The second one is located
inside the output optics cover of the laser tube assembly that is not visible under normal
operating conditions. The third is located on the outside of the laser tube assembly. The second
and third locations are only visible if the laser tube assembly is removed for service and is not
visible under normal operating conditions.
Locations (1): Affixed to the back of the laser tube assembly. Not visible under normal
operating conditions. Only visible if laser tube is removed for service.
Locations (1): Affixed to the back of the laser tube assembly. Not visible under normal
operating conditions. Only visible if laser tube assembly is removed for service.
To Next Page
Loading...