Hermle OLEUM - Loading and Overloading of Rotors

OPERATION
14 OLEUM_V1.19_eng © Hermle Labortechnik GmbH
ATTENTION!
Swing out rotors may only be operated if all seats are loaded with balanced and weight
symmetric buckets!
Figure14: WRONG
Figure15: RIGHT
ATTENTION!
Do not operate the centrifuge with rotors or buckets that show any signs of corrosion
or mechanical damage.
Do not operate with extremely corrosive substances, which could damage the rotor
and buckets.
In case of any questions, please contact the manufacturer!
2.1.3 Loading and Overloading of Rotors
The maximum permissible speed and the maximum permissible total filling weight of the permissible
rotor are:
Rotor Number
Max. Speed
Total filling
Weight
221.40 V20
3000 rpm
750 g