Hermle OLEUM - Product Description and Setup

CONTENTS
© Hermle Labortechnik GmbH OLEUM_V1.19_eng I
1. PRODUCT DESCRIPTION ..................................................................................................1
1.1 Safety Instructions ............................................................................................................................................ 1
1.2 Intended Purpose .............................................................................................................................................. 1
1.3 Brief Description ................................................................................................................................................ 1
1.4 Delivery Package ............................................................................................................................................... 1
1.5 Operating and Display Elements ...................................................................................................................... 2
1.5.1 LCD-Display .................................................................................................................................................... 3
1.6 Signs and Indications of the Centrifuge .......................................................................................................... 4
1.6.1 General ............................................................................................................................................................ 4
1.6.2 Product Nameplate (Example) ........................................................................................................................ 4
1.6.3 Warning and Information Signs ....................................................................................................................... 5
1.6.4 Danger, Precautions and Warranty ................................................................................................................. 5
1.6.5 Following Rules Must Strictly be Adhered To: ................................................................................................. 6
1.6.6 Warranty .......................................................................................................................................................... 6
1.7 Installation of the Centrifuge ............................................................................................................................ 6
1.7.1 Unpacking the Centrifuge ................................................................................................................................ 6
1.7.2 Space Requirements ....................................................................................................................................... 7
1.7.3 Installation ....................................................................................................................................................... 7
1.7.4 Attention before first use!................................................................................................................................. 8
1.8 Basic Adjustments ............................................................................................................................................ 9
1.8.1 Access to Mode: "Operating Data" .................................................................................................................. 9
1.8.2 Sound Signal Turn On / Off .......................................................................................................................... 10
1.8.3 Volume Pre-Selection of Sound Signal ......................................................................................................... 10
1.8.4 Song Selection - End of Run ......................................................................................................................... 11
1.8.5 Keyboard Sound Turn On / Off ...................................................................................................................... 11
1.8.6 Retrieving Operating Data (operated by skilled or service engineer only!) .................................................... 12
2. OPERATION ...................................................................................................................... 13
2.1 Mounting and Loading the Angle Rotor ........................................................................................................ 13
2.1.1 Installation of Rotors ...................................................................................................................................... 13
2.1.2 Loading Swing Out Rotor .............................................................................................................................. 13
2.1.3 Loading and Overloading of Rotors ............................................................................................................... 14
2.1.4 Removing the Rotor ...................................................................................................................................... 15
2.2 Lid ..................................................................................................................................................................... 15
2.2.1 Lid Release ................................................................................................................................................... 15
2.2.2 Lid Lock ......................................................................................................................................................... 16
2.3 Pre-Selection .................................................................................................................................................... 16
2.3.1 Pre-Selection of Speed / RCF-Value ............................................................................................................. 16
2.3.2 Pre-Selection of Running Time ...................................................................................................................... 17
2.3.3 Pre-Selection of Brake Intensity and Acceleration ........................................................................................ 17
2.4 Radius Correction ............................................................................................................................................ 18
2.5 Program ............................................................................................................................................................ 19
2.5.1 Storage of Programs ..................................................................................................................................... 19
2.5.2 Recall of Stored Programs ............................................................................................................................ 20